Banding machine for blank or pre-printed strips with eye mark sensor for registration.

-Schneider PLC+ touch screen
-available in 30mm/40mm/50mm/75mm/100mm/125mm/150mm wide band
-Banding Speed : 27 bands/Minute
-Banding Tension : 5-40N
-Applicable for both Kraft paper band and OPP film
-Material Specification :
Thickness: 40-130 mic,
Length: 500-1200meters
Core: 76mm
-With Eye mark sensor
-60 seconds Pre-Heating time
-Welding Method : Heat Sealing
-With counter
-Jumbo roller dispenser to load 500-1200 meters roll
-Schneider Servo motor
-Persisting heater temperature
-Easy maintenance
-Customize arch size
-Banding Size :
Min:50*10mm
Max: 360*200mm
-Arch Size : 370*200 mm
-Table Height : 980mm
-Power Supply : 220V 50hz 1phase or 110V 60hz 1phase
-Power Rate : 1250W

Main features :
Touch screen controll
Automatic speed regulation
Pneumatic laminator with internal silent compressor
Silicone roll
Adjustable Pneumatic pressure regulation
Easy pneumatic roll movement (up and down)
Hands Safety sensor
Plug and play
Self-adaptive, the air pressure system with independent pistons adapts automatically to different thicknesses
Tournable working table
Adjustable stainless steel rolls friction
Pedal for safety precedure start
Stop roll drop (for laminate rigid media up to 50mm)
Safety tower light

Optionals :
Re-winder
Vertical pneumatic and motorized cut
Unwinder Roll holder with clutch

Available models :
Neolam Plus heated roll 50c
Neolam Plus S Top Hot roll 120c
Neolam Plus M Superior hot roll and lower hot roll 120c for encapsulation

Robust and extremely precise even under heavy duty, the Citoborma 490 performs like a professional paper drill.
This easy-to-use machine for up to 6 drill heads comes with a wide range of standard functions.
For special requirements and sensitive substrates, the Citoborma 490 offers special drill heads, variable drilling and table lifting speed, drill bit cooling and lubrication and many other extras.
1–6 drill heads, for drill bit diameters from 2-35mm.
Throat depth of up to 270mm permits drilling of two A4 sheets (one A3 sheet) in a single pass.
Easy drill head and drill bit replacement to reduce set-up time
Optimum safety due to two-hand operation and safety cover.
Drill bit lubrication with cooling system (optional).
Infinitely variable drilling speed and table lifting (optional).
1 year warranty.

As a versatile card cutter, the Zip-21A shows the superior processing speed and accuracy than other digital finishing machines in similar specifications.
The Zip-21A surpasses other digital finishing machines in the storage space, 999 job memories, which is useful for the users to reestablish their jobs.
The steady air feed system and double sheet detector thereby reduce the problems which may occur with the digital stocks.
And both registration of mark and registration of sheet edge are employed for accurate trimming.
The Zip-21A cross cuts the sheet with a guillotine cutter and then uses an adjustable blade cassette to slit and / or score the sheet immediately.
This combination of the two cutting systems allows common digital print products (like 21 or 24 up business cards) to be accurately processed in a single pass.
All the information could be easily input at the touch screen, which allows a scissor cut or a variable size gutter to be removed between individual cards if required.
A fixed 6mm strip is removed by the slitting wheels.
The card width is quickly and easily adjusted by moving the slitting wheels mechanically or extra cassettes can be purchased to set up regular jobs.
If you are seeking a fast, accurate, and high-quality digital print finishing machine, the Zip-21A Card Cutter will be your good choice.
Touch Screen and Friendly Operation.
Up to 350 gsm.
Double Sheet Detection.
Deep Pile and Air Feeder.
Registers from Mark or Lead Edge of Sheet.
999 Job Memories.

With ROWEFOLD 721-1 the technological leader for wide format solutions sets benchmarks because it is the high performance offline folding system with superb folding quality and unique operating ease.
Its unique operating characteristics are due to the technologically advanced feed table of the ROWEFOLD 721-1.
This is made of high-grade stainless steel and has a special non-stick surface.
Its excellent sliding properties mean wide format documents are fed easily and safely.
Simply select one of the 12 pre-installed folding programs or an individual special folding program via the operating terminal, lay the document down and pick it up completely folded.
For the output, choose, in accordance with your folding volume, between the side output tray for approx. 25 folded documents and the practical optional belt output for approx. 50 folded documents.
High performance, fan and cross folding in one step.
Exact folding results in all DIN and special formats even with high volumes.
Maximum fold length fan folding : 6000mm or optionally endless and without unfolded pages inbetween with the patented Endless Folding Kit UNLIMITED
Maximum fold length cross folding : up to 2500mm.
12 pre-installed standard folding programs and additional freely programmable user specific folding programs.
Folding speed up to 18m/min.
Integrated output tray for approx. 25 folded documents or belt output (optional) for approx. 50 folded documents
Whisper quiet with intuitive operation and handling
Premium feed table at ergonomic operating height, made of high-grade stainless steel with non-stick surface.
Minimal maintenance and operating costs.
Small space requirement.
Warranty 1 year.

RISO SF 9390 digital duplicator offers exceptional print quality at unrivalled maximum print speed and incredibly low cost, enabling easy and efficient large volume printing.
It reproduces photographs and text with remarkable image quality and, in addition to enhanced environmental features, incorporates a variety of improved print functions.
The RISO SF 9390 is a sophisticated monochrome digital duplicator that combines versatility and productivity enhancing features with excellent image reproduction.
In addition to an adjustable five-speed function for printing between 60 and 130 pages per minute, the RISO SF 9390 digital duplicator had a high speed mode that prints at a maximum of 190 pages per minute.
A variety of documents, including meeting handouts and marketing and promotional material, can be printed in a speedy and efficient manner regardless of the required paper size.
This upgraded model boasts outstanding performance designed to meet diverse business printing needs.
In addition to security features, the RISO SF 9390 digital duplicator is equipped with numerous functions, such as printing directly from a USB flash drive, that make it extremely versatile and enhance the ease of printing.
The RISO SF 9390 digital duplicator both scans and prints information at a high resolution level of 600 dpi, producing sharp and clear images of even fine lines and small characters.
Moreover, it can reproduce subtle colour gradations enabling users to print clear copies of photos, shaded areas of images, and documents writing using a pencil
Unique technology enables the reproduction of uniform solid images
The RISO SF 9390 model adopts a pre-suction mechanism in which air is passed between the paper and the print drum (cylinder) to suck the paper in a downward direction, thus separating it instantaneously from the drum before it is output.
This original technology allows the ink to be transferred uniformly to the paper to produce clear images.
KEY FEATURES :
Print speed: up to 190ppm.
Paper format : A4/A3.
Scanning and printing image resolution : 600dpi x 600dpi.
Print paper weight: 46 gsm - 210gsm.
RISO iQuality SystemTM.

Grâce au nouveau Riso deux couleurs MH 9350, vous bénéficiez de l'impact de deux couleurs en un seul passage et profitez d'une utilisation facile et pratique. Vous obtenez un document professionnel.
Un document en deux couleurs est forcément plus attractif, notamment lorsque vous imprimez des tracts publicitaires, des prospectus, des documents commerciaux, des invitations, des coupons, des journaux d’information ou bulletins…
Le Riso MH 9350 offre les avantages d'une impression bicolore à très grande vitesse (jusqu’à 150 ppm), avec la précision et la qualité d’une résolution de 600 x 600dpi.
Sa technologie de pointe permet d'obtenir, très simplement, la séparation des couleurs, la réalisation des maquettes et l'impression.
Le duplicopieur MH 9350 est dotée du procédé « 2 couleurs simples » qui permet de créer facilement les deux masters.
Un choix de procédures d’exécution intuitives permet de sélectionner la méthode la plus facile ou la mieux adaptée à une tâche d’impression en particulier.
Principales caractéristiques techniques :
Impression 2 couleurs en un seul passage
Vitesse : jusqu’à 150 pages par minute
Format impression : A4/A3
Résolution impression, scan et numérisation : 600 x 600dpi.
Grammage papier : 46-210gr./m².
Carte réseau RISO standard.
Fonction de séparation automatique des couleurs.
Système de gestion de l’utilisation et quotas par utilisateur.
Interface imprimante GDI intégrée.
Ecran tactile LCD couleur.
Impression à partir d'une clé USB 2.0.
Copie code intégré.
Impression sécurisée.
RISO iQuality SystemTM.
Livré avec stand.
Livré sans consommables.
Garantie 1 an.
Conforme aux normes de sécurité CE.

The HYDROCUT 650 hydraulic paper guillotine is essential processing machine for digital printing houses.
The highest security level (two-hand operation, optical light
curtain) and low noise level peculiar to it during operation.
The adjustment of cutting length takes place with stepping motor satisfied all requirements.
The pressing of the paper to bind always takes place with hydraulics but it is possible to move the paper press with foot before hydraulic pressing.
The degree of the pressing is adjustable while the cutting force is adjusted by the manufacturer.
The changing of the blade is simple; to do it safely we supply an appliance compulsory to buy.
Accessory of the machine is the cutting line display.
The adjustment of the cutting length happens with microcontroller Mitsubishi aided digitally displayed back gauge.
The machine can be programmed with absolute and relative memory
storing.
Specifications :
Maximum Cutting lenght : 650mm.
Maximum Cutting depth : 650mm.
Minimum Cutting depth : 35mm.
Maximum Cutting Height : 100mm.
Mono phase power supply : 230 volts-50Hz - 16A - 3kw.
Paper pressing : foot pedal and hydraulically.
Adjustable pressing volume (Bar) : 10-80.ch
Optical cutting line display : Yes.
Safeguards : optical light curtain, two-hand operation.
User interface : touch screen & job memory.
Air table & side table (2pieces) : option.
Dimensions of the machines : D=1750mm x W=1530mm x H=1470mm.
Net weight : 650kg.

UV coating is a process whereby a polymer resin changes from a liquid to a solid with the help of an ultraviolet light source. UV coating can be a direct replacement for lamination and provides a protective covering that adds value to any document, increasing the vibrancy and richness of its colours (as well as protection from scratching and fingerprints).

The UV53F is an upgraded hand fed model UV53 into line with high pile feeder. It offers competitive cost of investment for automatic machine and the cost of consumables in the long term is remarkably lower than lamination.

Key features:

Perfect solution for full coating of offset and digital stocks (tested on Canon, HP Indigo, Konica Minolta, Ricoh and Xerox)
Gloss or matt coating available
Adjustable speed of rollers and thickness of varnish
1 x UV lamp curing UV and 3 x IR lamps (for pre-heating also wax based toners)
High quality rubber roller for varnish application; metal roller for varnish thickness adjustment
Japan made varnish pump
Scraping blade allowing to do double side coatings in two passes
Integrated fan blower to connect with indoor filter or outdoor trough pipe
High quality electronics
Compact footprint (only small working space required)
Easy to move thanks to wheels
Simple to use (easy adjustments as well as short time cleaning procedure)
High pile (500mm) feeder with suction paper taking
Technical info
Paper size Max 520 mm x 740mm Min 125×210mm
Paper gsm thickness range 0.15-0.35 mm (approx. 158g-350g)
Loading capacity of feeder 500 mm
Speed electronically adjustable in range 3-20 m/min
Varnish coat thickness adjustable in range 5 – 25,4 micron
Feeder Dimensions Coater: 830 x 940 x 1000 mm
Weight Coater: ~200 kg
Power supply Coater:3 phase 400V/50Hz, fuse 32A Feeder: AC220V-240V,50/60Hz, 500W
Note *coating effect depends on the varnish type as well as on the type and quality of paper. The best coating result can be reached on the gloss, coated papers. Uncoated papers absorb varnish and UV varnishing effect may not be satisfying.

The BM4000 is a versatile booklet maker designed to work with low to mid volume digital production printers.
It delivers booklets of exceptional quality and is able to feed long printed sheets to produce a wide variety of applications, including A4 landscape booklets, which is becoming an increasingly important expectation of customers.
Produce square folded booklets from A6 to A4 Landscape, or large format 297mm x 297mm.
Corner stapled documents in portrait A4.
Edge stapled documents in portrait and landscape A4.
Up to 140 or 200 page booklet capacity.
Supports up to 660mm long sheets without CST or 620mm with CST.
The basic configuration with hand feed capability enables users to make booklets in the offline mode.
The new system architecture enables customers to produce high quality booklets from A6 to A4 landscape, and has all the key processes needed to produce corner and edge staple, folding, spine forming, and full bleed trimming, all combined in one single, easy to use system.
This new booklet maker offers the ability to produce the all new long sheets applications while maintaining the small and compact size.
Specifications :
BM4035 / BM4050 Booklet making
Paper size min : 145mm x 210mm.
Paper size max : 320mm x 660mm - 330mm x 620mm with CST.
Stapling : Easy change, low maintenance, heavy duty staple cartridges.
Staples per cartridge : 5000.
Paper weight min : 64gsm.
Paper weight max : 300gsm.
Book thickness min. set thickness - 1 sheet 80gsm (when folded makes a 4 page leaflet)
Max. set thickness – 3.5mm and 5mm (approx. 35 sheets and 50 sheets of 80gsm bond plain paper).
Max. finished book thickness - 7mm and 10mm (approx 140 and 200 pages 80gsm).
Warranty 1 year.

GRAFCUT 73H fully hydraulic guillotine for heavy-duty cutting.
Cutting the maximum format 730mm width x 720mm depth.
High cutting accuracy 0,1mm of max paper stack up to 100mm.
25mm smallest cut (false clamp 50mm in standard).
Adjustable hydraulic pressure.
Powerful hydraulic drive for knife and clamp (fully adjustable).
Foot-pedal for material pre-clamping.
Technical info :

Cutting width : 730mm.
Cutting depth : 710mm (program mode)/730mm (manual mode).
Cutting height : 100mm.
Blade drive : Hydraulic.
Clamp drive : Hydraulic.
Backguage : Electro-mechanical.
Smallest cut : 30mm without false clamp (60mm with false clamp).
Front table lenght : 640mm.
Front table height : 925mm.
Side tables dimension : 376mm x 658mm.
Cutting accuracy : 0,1mm.
Power supply : 400V/50 Hz, 3kW.
Dimensions w/o side tables : 1105 x 1755 x 1460mm.
Dimensions with side tables 1855 x 1755 x 1460mm.
Weight : 600kg.
Warranty 2 years.
CE Conformity.

Warranty 2 year.

Programmable power guillotine with hydraulic clamp and professional features.
Technical Data :
Cutting length: 720mm.
Cutting height: 80mm.
Narrow cut: 20mm.
Table depth: 720mm.
Narrow cut with false clamp installed: 90mm.
Power supply (other voltages available):400 Volt / 50 Hz / 3~
Motor performance (input capacity):1.5 kW
Dimensions:H 1335 x W 1305 x D 1540mm.
Dimensions with side tables:H 1335 x W 2100 x D 1600mm.
Weight:620kg.

Main features :
Adjustments from keyboard and display of the thickness of the support to be laminated, up to 40mm
Simple loading and positioning of the material
Oscillating feeding table for easy loading of the material
Separate regulation with separate display of the temperatures of the two rubberized rollers
Regulation from 0 ° C to 120 ° C for model "H"
Foot pedal control for hands-free work
Comprehensive safety system with emergency stop and optical safety protection with self-verification
Viewing and reporting of any anomalies
Electronic adjustment from the keyboard and visualization on the display of the speed of the rollers
Power supply voltage and frequency 400V / 50Hz. or 220V 50-60Hz
Absorbed power 12A 6200W. For 400V / 50Hz

PK automatic intelligent cutting system adopts fully automatic vacuum chuck and automatic lifting and feeding platform. Equipped with various of tools, it can quickly and precisely make through cutting, half cutting, creasing and marking. It is suitable for sample making and short-run customized production for Signs, printing and Packaging industries. It is a cost-effective smart equipment that meets all your creative processing.

High Precision Vision Registration System (CCD)
With high definition CCD camera, it can make automatic and accurate registration contour cutting of various printed materials, to avoid manual positioning and printing error, for simple and accurate cutting. Multiple positioning method can meet different materials processing demands, to fully guarantee the cutting accuracy.

Automatic Sheet Loading System
Automatic sheets loading system suitable for printed materials automatic processing in short run production.

QR Code Scanning System
IECHO software supports QR code scanning to retrieve relevant cutting files saved in the computer to conduct cutting tasks, which meets the customers’ requirements for cutting different types of materials and patterns automatically and continuously, saving human labor and time.

Computer, stand, screen, mouse, keyboard and compressor* included
*entrey level compressor included for low-mid use. Possibility to order in option a high capacity compressor for high volumes.

PARAMETER :
Cutting Head Type : PK
Machine Type : PK0604
Cutting Area(L*w) : 600mm x 400mm
Flooring Area(L*W*H) : 2350mm x 900mm x 1150mm
Cutting TOOL : Universal Cutting Tool, Creasing Wheel, Kiss cut tool
Cutting Material : Car sticker,Sticker, Card Paper, PP Paper,reflective material
Cutting Thickness : <2mm
Media : Vacuum System
Max Cutting Speed : 1000mm/s
Cutting Accuracy : ±0.1mm
Data Formal : PLT、DXF、HPGL、PDF、EPS
Voltage : 220V±10%50HZ
Power : 4KW

LIGO is the ideal solution for printing houses and digital print shops that need to manage the perfect binding of digital prints in-house. It uses EVA glue and has been developed to consistently ensure the highest quality in binding, even during intense and continuous operations. Using Taca Pro glue, it can effectively bind coated papers with weights up to 160 gsm. It supports binding with soft covers, hard cardboard covers (up to 2.8 mm thick), and notepad binding (coverless), with a block thicknesses ranging from 1 to 50 mm.

With LIGO, a perfectly squared spine is always guaranteed, regardless of the thickness of the book, pre-creasing is not necessary, thanks to the force applied by the cover clamp, which is fully adjustable from the touchscreen. The machine is equipped with both a notching tool and a milling blade to enhance glue adhesion or to separate the signatures before binding. All settings can be managed in a few seconds directly from the large and intuitive touchscreen display. LIGO automatically adjusts the work cycle speed based on the thickness of the inserted block to ensure correct notching and gluing (the depth of notching is managed by software).

The adaptive side gluers, automatically adapt to the book thickness and do not require any manual adjustment. Among the features of the new software, the possibility to obtain production reports and integrate the machine in an Industry 4.0 perspective. The innovative user interface allows an optimal user experience by guiding the operator in setting the optimal parameters required for each process with extreme ease.

Technical features
Ligo
Maximum spine length 420 mm
Maximum book block thickness 50 mm
Minimum book block thickness 1 mm
Binding productivity with cover 180 books/hour
Work cycle speed adjustment Automatic
Side gluers Yes, adaptive
Book clamp closure adjustment Yes, electric
Notching depth adjustment Yes, electric
Soft covers weight 70 - 500 gr/m2
Hard covers thickness Up to 2.8 mm
Maximum cover size 700 x 420 mm
Power supply 230VAC – 50/60Hz
Electrical absorption 2500 W
Dimensions (WxDxH) 1400 x 634 x 1364 mm
Weight 280 kg

Electrostatic and mobility :
Thanks to the ESD wheels, peaks in tension are discharged in a controlled manner, without any consequences. Smart mobility increase worker productivity and more efficient space organization.

Milling and notching :
optimizes and favors the strength of the binding resulting in a better page hold and a higher quality finished product.

Smoke extractor :
this is an exclusive system designed by Mamo, able to be connected up to an external extractor.

Your monochrome prints in high volumes at high speed!

The responsiveness of the ComColor black and white FT1430 printer gives you great flexibility. You thus gain autonomy and optimize the management of your time by reducing execution times.

The advantages:
-High performance
Thanks to the feeding device of the black and white ComColor FT, you can print in 600×600 dpi, double-sided up to A3 format without any loss of speed, at 140 ppm. It allows you to cope with all printing requests in record time.

-Unmatched reliability
With FORCEJET™ cold inkjet technology, the availability rate is optimal. The paper is not exposed to any heat source and does not curl: this considerably reduces the risk of incidents linked to the passage of the paper.

-Ergonomic
Intuitive and ergonomic, the ComColor black and white FT is very easy to use and no special skills are necessary to take advantage of all its capabilities.

-Versatile solution
The ComColor FT1430 professional printer is modular and allows you to diversify your media: administrative documents, reports, presentations, booklets, leaflets, posters, letterhead, invoices, pay slips, envelopes, etc.

Various optional modules:
-Comcolor Express RS1200C controller
-HS7000 scanner
-2000 sheet input tray
-Staggered sorting reception tray + stapling
-Envelope feeder
-FT shaping module

The binding process is widely eased by a clever use of automation. The operator input the parameters for the book with predefined programs via the intuitive user interface on a 7-inch color digital touchscreen: type of cover, type of paper, format.
With this information, the machine self-adjusts to create the best possible binding.
The operator controls all the critical steps to make a good quality book.
Roughening, gluing and nipping functions are automated for precision, consistency, ease and user comfort.
Pureva Smart calculates automatically the optimal pressure, speed and number of cycles for the roughening and gluing steps, as well as the nipping time for each book according to format, thickness and cover type. .
Quick auto-cleaning :
Its clever system makes it easy and quick to clean or change the tank, even for non-expert users. With its cleaning setting, Pureva Smart needs only a few minutes to empty and clean its PUR glue tank.
Fastbind Pureva Smart is a fully equipped ergonomic workstation. Compact, silent, clean, and very safe, it fits in any modern digital printing environment or shop.
It has been designed to ensure the best possible binding quality. Reliable and robust, it guarantees quality and productivity for a budget-friendly investment, for all your on-demand and short to medium runs finishing needs.
Technicals spécifications :
Production speed : Up to 180 books per hour.
Min/max binding thickness : 0.1–45mm.
Max. binding length : Up to 455mm.
Max. binding height : Up to 335mm.
Max soft cover thickness : Up to 400gr./m².
Voltage (V) / Frequency (Hz) : 220–240 / 50–60.
Max. current : 6.3A.
Machine dimensions : W=1130mm x D=650mm x H=1350mm.
Weight : 177kg.
Warranty 1 year.
CE-Conformity.

This stitching machine with handfeeding stations allows:
Standard stitching and loop stitching or mixed applications.
The difference between this machine and conventional saddle binders is the ability to gather and stitch unusual formats or paper weights.
Subsequent extension of up to 6 stations.
Highest efficiency with up to 4000 cycles per hour.
Gentle brochure transportation via double carriers to prevent damage to the product.
Can be equipped with up to 4 Universal 43/6 narrow stitching heads.
Fast conversion to “staggered stitch” production.
High amount of flexibility for small runs and sample stitching, as well as oversized formats
Brochure format (spine x head/tail): 100 x 80mm to 430 x 340mm.
Warranty 1 year.

Main features :
Adjustments from keyboard and display of the thickness of the support to be laminated, up to 40mm
Simple loading and positioning of the material
Oscillating feeding table for easy loading of the material
Separate regulation with separate display of the temperatures of the two rubberized rollers
Regulation from 0 ° C to 120 ° C for model "H"
Foot pedal control for hands-free work
Comprehensive safety system with emergency stop and optical safety protection with self-verification
Viewing and reporting of any anomalies
Electronic adjustment from the keyboard and visualization on the display of the speed of the rollers
Power supply voltage and frequency 400V / 50Hz. or 220V 50-60Hz
Absorbed power 12A 6200W. For 400V / 50Hz

Standard features:
Unique closed PUR system, (PUR spine and side gluing)
(tank capacity: 500g)
Adjustable glue cut-off from the touch screen
Adjustable book positioning from the touch screen(max. 10 mm)
Fix milling depth (0.5 mm) and notching
Large cover holder, with skew adjustment
Paper dust extractor
Cover sensor
1~230V

Available options for this model:
Magnetic bookblock support
Sideshelf
Tape binding
Tiltable milling unit
Automatic carriage start
Glue level indication
Automatic setup according to block thickness
Direct hardcover binding, with adjustable nipping height
Remote service support, Industry 4.0 ready