Our second-hand products
A solution for every need
We have a range of reconditioned used products or exhibition equipment in our showroom. Contact us to find out more.
Plockmatic BM200
PLOCKMATIC BM200 bookletmaker equipped with the FTR200 trimmer and the SQF200 square press module.
Machine in excellent general condition and fully reconditioned by an approved Technical Service.
The BM 200 bookletmaker module can fold or staple-fold.
With it, you can produce 100-page brochures !
FTR 200 finishing trimmer : This trimming module connects to the BM200 bookletmaker.
The cut strips are collected in a large collection bin.
The waste from the trimming is evacuated thanks to its high-performance ventilation system.
SQF 200 "square press" finishing module : Thanks to this module, the System 200 allows you to produce magnificent square-back brochures.
Technical information :
BM200 :
Capacity: 25 sheets 80gr./m²
Speed: 3,000 bundles/h.
Mini/max format : 206x275 / 320x457mm.
Mini/max weight : 64 / 300 gr./m².
Magazine capacity : 2 x 5;000 staples.
FTR 200 :
Capacity : 25 sheets 80gr./m².
Speed : 1.800 booklet/h.
Cutting length : up to 15mm.
SQF 200 :
Capacity : 25 sheets 80gr./m².
Speed : 1.800 booklet/h.
3-month warranty.
Price : €2,950.00 excluding VAT
Capacité : 25 feuilles 80gr./m².
Capacité : 25 feuilles 80gr./m².
Vitesse : 1.800 liasses/h
Garantie 3 mois.
Prix : 2.950,00€ HTVA
Sleeking Cutting machine HX-680
Electric cutting machine for Slleking foil roll film HX-680.
Machine on display in our showroom.
The HX-680 cutter allows you to cut gold foil or OPP reels to the desired format.
With the HX-680 you will avoid unnecessary film losses.
Cutting width : 680mm.
Maximum diameter of the reel to be cut : 150mm.
Core diameter 25mm (1").
Machine dimensions : W=950mm x D=340mm x H=530mm.
Weight : 40kg.
Power consumption : 220v. - 50Hz - 370 watts.
6-month warranty.
Price : 490,00€ excl. vat.
DigiCut 46
DigiCut 46 electric guillotine, used equipment in excellent condition.
Programmable electric paper cutter with automatic cutting and press.
Light barrier by photoelectric cells.
Timed and anti-repetitive two-hand control.
92 programs with 92 cutting positions each can be stored.
Materialization of the cutting line by diodes.
Technical information :
Cutting width : 460mm.
Cutting length : 450mm.
Cutting capacity (height) : 60mm.
Minimum cut : 25mm.
Cutting precision : 0.2mm.
Power supply : 230Volts / 50Hz.
Dimensions : H = 1263mm x W = 723mm x D = 924mm.
Weight: 120kg.
3-month warranty.
Price : 1.295,00 euros excl. vat.
Prix : 1.295,00€ HTVA
FASTBIND ELITE XT
Fastbind Elite XT Perfect binding machine, second-hand equipment in strictly impeccable condition.
The FASTBIND ELITE XT binding machine is capable of binding up to A3 format, it offers significant flexibility of use and application.
It produces simply and quickly paperback books, hardcover documents, notepads or reports.
Ideal for copyshop, reprographers, publishers, binderies, photographers.
Books/hour capacity : Up to 180 bindings/hour depending on the operator.
Minimum/maximum binding thickness : 0.1–50mm.
Maximum binding length : 455mm.
Minimum and maximum binding height 140/320mm.
Maximum cover thickness : 400gr./m².
Voltage 220–240 V.
Machine dimensions (L x W x H): 1050 x 520 x 570mm.
Weight : 52.2kg.
Guarantee 3 months.
Price : €1,950.00 excl. VAT.
Ideal 6550-95EP
Electric guillotine IDEAL 6550/95ep, used equipment fully revised by Ideal approved technical service.
Guillotine with press and electric cutter.
Programming : 99 programs with 99 cutting positions each.
Technical information :
Cutting length : 650mm.
Maximum cutting capacity : 80mm.
Cutting depth : 610mm.
Minimum cut : 25mm.
Power supply: 230Volts / 50Hz.
Motor power (consumption): 1.5kW.
Dimensions: H=1260mm x W=995mm x D=1220mm.
Weight: 304kg.
3-month warranty.
Includes 1 spare blade in good condition and sharpened
Price : 2.900,00 euros excluding VAT.
MetalBind MB 300
METALBIND MB 300 binding machine with metal clamping strip.
Showroom machine in strictly impeccable condition.
Easy-to-use binding machine guaranteeing professional finishing quality.
The Metalbind MB 300 binding machine offers guaranteed long-lasting binding without any detachment of the sheets.
The MB 300 can bind hard covers or soft covers effortlessly, without glue, without electricity and without perforation !
Binding capacity up to 300 sheets 80gsm.
Large choice of colours for the different bindings : white, black, dark blue, silver, burgundy, red, green...
Machine dimensions : W=530mm x D=320mm x H=270mm.
Weight : 19km.
12-month warranty.
Price : €480.00 excl. VAT.
Citoborma 290
Citoborma 290 2-head electric drilling machine.
Used machine in good general condition.
Fixed 2-head drilling machine with 80mm spacing equipped with a tabulator with 6 pre-programmed positions.
Large table for paper size up to 470mm.
Maximum throat depth : 105mm.
Maximum pile height : 60mm.
Automatic paper centering.
Uses drill bits with diameters of 2mm to 20mm.
Central adjustment of the paper width.
Drill bit descent by lever.
Equipped with a large mobile table of 580mm x 425mm.
Dimensions : H=70cm x W=64cm x D=60cm.
Weight 59kg.
Electrical connection 230v - 50Hz - P = 0.5kw.
Warranty 3 months.
Price : 1.195,00€ excl. vat.
STAGO HM6-2BS
STAGO HM6-2BS 2-head electric stapling machine.
Used machine in excellent general condition.
Suitable for intensive use, this electric stapling machine combines comfort and robustness and is naturally designed for professional use in printing shops, repro departments or schools...
The STAGO HM6-2BS is equipped with two fixed heads with a standard spacing of 80mm.
Equipped with a large swivel table for flat or saddle stapling suitable for up to A3 paper format.
Possibility of disconnecting a head.
Adjustable stops on the table.
Technical information :
Triggered by electric pedal.
Types of staples that can be used : 24/6 - 24/8 - 24/10.
Stapling capacity : 60 sheets 80gsm.
Stapling margin: up to 220mm.
Magazine capacity: 400 staples/head.
Power supply: 230Volts / 50Hz.
Dimensions: H=600mm x W=550mm x D=450mm.
Weight : 22kg.
3-month warranty.
Price: €1,150.00 excluding VAT.
Hohner Foldnak Compact
Hohner Foldnak Compact bookletmaker line.
Used equipment in excellent condition and very little used.
The line is composed of a ROBOFEEDER automatic feeder, a FOLDNAK COMPACT stapler-folder, an accumulation station and a TRIMMER front-cutting guillotine.
The Foldnak Compact line allows a maximum speed of 3.000 brochures/hour with different formats.
Equipped with an automatic "Intelligent" Robo-Feeder.
The stack of printed paper is inserted into the Robo-Feeder and is automatically separated.
The booklet covers can be fed through the second feed bin.
The Foldnak Compact bookletmaker can fold and staple up to 25 sheets of 80gsm.
Minimum paper size: 105mm x 210mm.
Maximum paper size: 325mm x 450mm.
Equipped with 2 stapling heads with automatic triggering by electric photocell with a capacity of 210 staples/head. Uses 26/6, 26/8S and omega Ri 26/6 staples.
Equipped with a motorized conveyor belt at the output.
The Foldnak Compact is equipped with a front-cutting guillotine.
Equipped with optical reading for double detection and an anti-static kit.
The line can be viewed in our showroom by appointment.
3-month warranty.
Price: €8.500,00 excl. VAT
FASTBIND PUREVA SMART
Fastbind Pureva Smart perfect binder, exhibition equipment from our showroom.
Machine in strictly new condition.
Designed for finishing digital printing, Pureva Smart is an ergonomic and complete workstation.
Quiet, compact, clean and odorless, it finds its place in any digital environment, shop or workshop, for small and medium series or binding on demand.
Its robustness guarantees you productivity and quality of binding for years to come, and this for a minimum investment.
The operator enters the parameters of his book via an intuitive interface: type of cover, type of paper, format.
With this information, the machine adjusts to create the best possible binding, automatically calculating the pressure, speed and number of optimal cycles.
Automated perfect binding for PUR glue (also possible for EVA glue as an option).
Binding in soft or hard covers.
Automated PGO notching.
Technical specifications:
Maximum book length: 455mm.
Maximum book width: 335mm.
Min. and max. book thickness: 0.1-45mm.
Max. cover thickness: 400gr./m².
Machine dimensions: W=1130mm x D=650mm x H=1350mm.
Weight 177kg.
Warranty 1 year.
Price : 11.600,00€ excl. vat.
Neolt NeoFold 920PL
NeoFold 920 PL electric plan folder, showroom equipment.
The NeoFold 920PL is placed on a sturdy stand, with a canvas for recovering folded plans.
This plan folder integrates a touch screen for programming, monitoring and even tutorials for simplified use.
An "automatic" control with paper detection on the table or on the pedal, gives you the choice to present your plan well and then start folding as you wish.
The rear cover, easily removable, allows direct access to the folder to facilitate its maintenance and cleaning.
The touch interface allows simple and intuitive choices.Plieuse électrique de plans NeoFold 920 PL.
Technical Informations :
Folding width : 920mm.
Max. Crossfold : A0.
Max. sheet length : Endless with modules of 250cm.
Grams : from 60gsm to 110gsm.
Max. speed : 20 m./min.
Power Supply : 230Volts / 50Hz.
Consumption : 50 Watts.
Machine Weight : H=1190mm x W=1160mm x D=1000mm.
Weight : 60kg.
Warranty 1 year.
Price : 2.590,00€ Hors excl. vat
Minipack Torre FM77 Digit
Used FM77 Digit wrapping machine in good general condition.
Cooling of standard sealing bars: optimal welding.
Uses Roll films with a thickness of 15µ to 50µ.
Packaging dimensions : W=800mm x D=500mm x H=250mm.
Roll Film dimensions : maximum width = 800mm.
Available programs : Sealing only, Sealing + shrinking, Sealing + delayed shrinking to the end of the seal.
Speed : from 6'' to 10'' depending on the temperature used.
6 programs available.
Three-phase electrical connection 380v - 16A.
Machine dimensions : W=1875mm x D=950mm x H=1410mm (open cover).
Weight: 185kg.
Delivery with a 30µ 650x650mm shrink film.
3 month warranty.
Price: €1,450.00 excl. VAT.
SUNRAY 433P
Sunray 433P electric paper cutter, used equipment.
Electromechanical descent of the press and the blade.
Technical information :
Cutting length : 433mm.
Cutting depth : 448.5mm.
Maximum cutting capacity : 40mm.
Minimum cut : 40mm.
Power supply: 230Volts / 50Hz.
Dimensions: H=1170mm x W=740mm x D=850mm.
Weight: 120kg.
Includes 1 spare blade in good condition and sharpened.
3-month warranty.
Price: €1,195.00 excl. vat.
IDEAL 4810-95
IDEAL 4810-95 electric guillotine.
Used guillotine reconditioned by approved technical service.
Electro-mechanical blade drive system with double guide rapid pressure device with handwheel.
Rear stop adjustment by crank.
Anti-repetitive timed two-hand control.
Cutting line lighting.
Cutting width : 475mm.
Table depth : 458mm.
Cutting capacity 80mm.
Dimensions: W=755mm x D=970mm x H=1360mm.
Weight 194kg.
Delivery with a sharp and undamaged reserve blade.
3 month warranty.
Price : 1.190,00€ excl. vat.
FlexFold 1.1 Folding Map machine
Recent used machine in excellent general condition;
Manual folding machine for all sizes up to 1100mm X 3500mm and paper thickness from 65 to 135gr./m².
Speed: 1 fold / second.
Fold length of 21cm.
Max length of the map : 350cm.
Locking and unlocking wheel control.
Delivered on stand.
Practical: storage bin for folded plans.
Overall dimensions: L=116cm x l=55cm x H=110cm.
Weight: 42kg.
Warranty 1 year.
Price : 895,00 euros excl. vat.
MORGANA TC-5500
Used TC-5500 perfect binder completely reconditioned.
The TC 5500 thermal binder allows glued square spine binding of small and medium series of documents at a high production rate of up to 320 cycles per hour.
Using pneumatic clamping and nesting technology, it allows you to perfectly hold and shape the spine of your bound works (books, brochures, pads of sheets, etc.) to give them a perfect square finish.
The binding cycles are automatic (carriage departure and return), the installation of the nesting cover being carried out manually (semi-automatic process).
The TC 5500 accepts many document formats and requires no pre-setting regardless of the thickness to be bound.
A grouting is carried out on the edge of the document to facilitate the penetration of the binding glue into the fiber of the paper, for optimal binding quality.
Gluing is carried out by a double cylinder coupled to an equalizing cylinder, for perfect application of the glue.
The heating temperature is adjustable as is the nesting time, to adapt perfectly to the different types of paper to be bound.
Equipped with a new compressor.
Technical informations :
Minimum paper size : 60 x 100mm.
Maximum paper size : 310 x 320mm.
Binding capacity : 500 sheets 80gr./m² (50mm).
Speed : up to 320 cycles/hour.
Adjustable temperature from 100°c to 190°c.
Consumption: 1.35 Kw.
Electrical connection: 220 volts - 50Hz.
Dimensions : W=1320mm x D=550mm x H=1250mm.
Weight : 185kg.
Warranty 3 months.
Price : 3.500,00 euros excl. vat.
IECHO DigiCut PK-6040
PK automatic intelligent cutting system adopts fully automatic vacuum chuck and automatic lifting and feeding platform.
Show-room machine.
Equipped with various of tools,it can quickly and precisely make through cutting,half cutting,creasing and marking.
I
t is suitable for sample marking and short-run customized production for sighs, printing and packaging industries.
It is a cost-effective smart equipment that meets all your creative processing.
Combine intelligent cutting/creasing/drawing functions-meet all your creative processing demands.
Fully automatic feeding system for more efficient production.
Cutting labels of shape.
Cutting/creasing any card board carton type.
With high-definition CCD camera, it realizes automatic and
precise positioning of various materials, automatic contour
cutting, solving problems such as manual positioning and
printing deformation, so as to achieve simple and precise
cutting purposes.
Scanning barcodes allows quick reading of cutting tasks.
Technical data :
Cutting aera : 600mm x 400mm.
Flooring aera : L=2350mm x W=900mm x H=1150mm.
Cutting tool : Universal Cutting Tool, Creasing Wheel, Kiss cut tool.
Cutting material : Car Sticker, Sticker, Vinyl, Crad paper, PP paper, reflective material.
Cutting Thickness : 2mm.
Media : Vacuum system.
Max Cutting speed : 1000mm/s.
Data format : PLT,DXF,HPGL,PDF,EPS.
Voltage : 220V-50Hz, 4kW.
Warranty 6 months.
The machine is delivered with a laptop computer configured and ready to use.
Price : 11.850,00€ excl. vat
WS-602
WS-602 electric stitching machine equipped with two robust stapling heads from the famous German manufacturer Hohner. Show-room machine (new).
The WS-602 allows flat or saddle stapling.
Ajustable stapling heads spacing from 55mm to 125mm.
The WS-602 has a stapling capacity of up to 60 sheets of 80gsm.
Width of staples : 12mm.
Uses spools of n°26 (0,5mm) or n°28 (0,4mm) wire.
Perfectly flat spine stapling quality.
Staple length adjustement.
Speed : 75 cycles/minute.
Electric connection : 220v-50Hz - Power 200 watts.
Dimensions : H=820mm x W=600mm x D=470mm.
Weight : 58kg.
Warranty 1 year.
Price : 1.995,00€ excl. VAT
SKYLAM 1650
Hot laminating or Cold laminating machine. Show-room machine.
Combined hot laminator (2x heated rollers up to 150°c.) or cold laminator for mounting.
Lamination width : up to 1650mm (65'').
Max thickness lamination : up to 13mm.
Speed : up to 5 meters/minute.
Equipped with 2 heating rollers diameter 95mm and two pressure rollers.
LCD display with temperature and speed control.
Equipped with infrared sensor.
Equipped with universal core in 57mm (2") and 76mm (3").
Pedal control.
Dimensions : W=1940mm x D= 540mm x H=1340mm.
Weight : 160kg.
Warranty 1 year.
Price : 3.450,00€ excl. vat
LAMI REVO OFFICE
Automatic laminating machine LAMI REVO OFFICE, show-room model.
The REVO OFFICE is a fully automatic and economical laminator.
It can automatically laminate from paper feeding to cutting.
The Revo Office automatic laminator is very easy to use, it is often available for self-service in copy-shop, business, administrations or schools.
Easy film adjustment :
Compared to ordinary automatic laminators, film setting of the REVO OFFICE is extremely easy !
Technical informations :
| Paper formats | A4 and A3 |
| Speed | 250 paper A4/ h. |
| Max. width lamination | 305mm |
| Thickness film | 50µ, 80µ, 100µ, 125µ |
| Roll film lenght | 100m (50µ), 50m (80µ, 100µ, 125µ) |
| Thickness paper | 60 - 160gsm/m² |
| Paper feeder | 200 paper (75g/m²) |
| Warming up | 5 min |
| Number of rolls | 4 |
| Power Supply | AC230V- 50Hz - P=1150W |
| Dimensions | W=680mm x D=560mm x H=337mm |
| Weight | 30kg |
Warranty 6 months.
Price : 2.450,00€ excl. vat
Automatic drilling machine D-50A
Foreuse à papier automatique D-50A, matériel de show-room équipée d'une mèche de diamètre 6mm.
La foreuse D-50A est idéale dans tout environnement bureautique.
La foreuse D-50A dispose d'une descente automatique de la mèche.
Opération en une touche.
Ajustement de la marge de 4mm à 25mm.
Table mobile avec ajustement central automatique.
Informations techniques :
Capacité de perforation : 50mm.
Format papier max. : 350mm x 250mm.
Format papier min. : 130mm x 100mm.
Diamètre des mèches : de 3mm à 9mm.
Marge ajustable de 4mm à 25mm.
Alimentation électrique : 230Volts / 50Hz.
Dimensions : H=480mm x L=530mm x P=480mm.
Poids : 36kg.
Garantie 1 an.
Prix : 895,00€ HTVA