Main features :
Equipped with multiple cutting units for simultaneous cutting on all four sides
A mobile optical sensor reads the most diverse cutting marks for the accurate cutting
Manual alignment of the prints to be cut in the longitudinal direction, while the vertical cutting units are set manually
Speed 500 linear meter/hr
Available for most varied materials, including photo papers, vinyl, paper for inkjet printing, polyester or polycarbonate films up to a thickness of 0.5 mm
Easy loading of the reels
Electronic controls with visual displays allow the operator to easily check any errors or malfunctions
Vertical self-sharpening Blade
Horizontal self-sharpening Blade

Optionals :
Laser
Single vertical blade
Double vertical balde
Online kit (this optional allow to put the machine online with almost all the printer)
Datasheet Generals
Max. operating width 1650 mm
Dimensions 165 > 2160x800x1110 mm; 165 Kit on line > 1650x1940x350 mm
Weight 165 > 95 kg; 165 Kit on line > 36 kg
Consumption 0,5 A
Datasheet Horizontal cut Vertical cut
Max thickness 1 mm 0.5 mm
Speed 40 m/min (131,24 ft/min.) 12,5 m/min (41,01 ft/min.)
Tolerance ± 1mm. to the mt /
The manufacturers reserves the right to change technical and aesthetical specifications without notice.
Datasheet Reel
Max. diameter of roll Ø 300 mm
Max. width of roll 1650 mm
Max. weight of roll 60 kg

LCD Touch Screen display with intuitive and easy-to-use software.
Auto-alignment.
Double sensor to read cross-marks.
Adjustable speed X & Y axis.
Excellent cutting area visibility.
Pneumatic Pinch Roll with silent compressor inside the machine.
Automatic waste collecting system.
Plug & Play.
Up to 10 pneumatic vertical cutting units.
Double load reel.
Tower Light.
New alignment system of vertical cutting units.
Open cutting units (no paper jam).
Monolithic machine structure.
Standard loading jumbo Roll 300mt.
Up to 20 customizable memories.
MATERIALS :
Paper (laminated or encapsulated).
Wallpaper.
Canvas & Polyester (with liner).
Reflective material.
PVC banner.
Vinyl & Vinyl sticker.
Display back lit & front lit.
Magnetic rubber.
Polycarbonate in film.
Optional Extras :
Single cutting unit (max 10).
Central twin cutting unit.
Laser ray for vertical cut.
Table for copies collection.
Dimensions : L=2520mm x D=800mm x H=1000mm.
Weight : 290kg.
Warranty parts only.

Main features :
LCD Touch Screen display with intuitive and easy-to-use software
Wallpaper automatic vertical alignment
Marks reading sensor
Self-identification and marks learning
X&Y axis adjustable speed
Excellent visibility of the cutting area
Pneumatic Pinch Roll with silent compressor inside the machine
Up to 10 vertical cutting units
Double loading roll
Tower Light
New alignment system of vertical cutting units
Open vertical cutting edges (no paper jam)
Monolithic machine body
Plug & Play
Standard jumbo Roll holder max, diameter 400 mm
Up to 20 Personalized Memories
Pneumatic system to separate the cutting waste

Optionals :
Vertical single pneumatic cutting unit (max 10)
Double central pneumatic cutting unit
Vertical cutting guide laser
Table extension for copy collection
Motorized stacker with air blade
Automatic table for copy collection
New Fixed table for copy collection stacker edition

Materials :
Paper (laminated or encapsulated)
Wallpaper
Canvas & Polyester (with liner)
Reflective material
PVC banner
Vinyl & Self-adhesive vinyl
Backlit & frontlit display
Magnetic rubber
Polycarbonate in film
Special materials to be tested

Width : 1650 mm
Cutting thickness : X axis : 1,2 mm max Y axis : 1 mm max
Speed Advancement : 1-50 m/minute
Cutting unit max : 10 vertical unit
Horizontal cutting speed : 1-150 m/minute
Power sup : 230V - 50Hz - 650W
Maximum roll capacity wallpaper : 70 kg

Main features :
LCD Touch Screen display with intuitive and easy-to-use software
Wallpaper automatic vertical alignment +7/-7 cm
Marks reading sensor
Self-identification and marks learning
X&Y axis adjustable speed
Excellent visibility of the cutting area
Pinch Roll with silent compressor on the machine for material loading
Up to 10 vertical pneumatic cutting units
Double loading roll
Tower Light
New manual system of vertical cutting units alignment
Open vertical cutting edges (no paper jam)
Monolithic machine body
Plug & Play
Up to 20 Personalized Memories
Pneumatic system to separate the cutting waste

Optionals :
Vertical single pneumatic cutting unit (max 10)
Double central pneumatic cutting unit
Vertical cutting guide laser
Table extension for copy collection
Motorized stacker with air blade
Automatic table for copy collection

Materials :
Paper (laminated or encapsulated)
Wallpaper
Canvas & Polyester (with liner)
Reflective material
PVC banner
Vinyl & Self-adhesive vinyl
Backlit & frontlit display
Magnetic rubber
Polycarbonate in film
Special materials to be tested

Width : 1650mm
Cutting thickness : X axis : 1,2 mm max Y axis : 1 mm max
Speed Advancement : 1-18 m/minute
Cutting unit max : 10 vertical unit
Horizontal cutting speed : 1-150 m/minute
Power sup : 230V - 50Hz - 650W
Maximum roll capacity wallpaper : 400 kg