HERCULES is manufactured for multiple working on all kind of booklets, book, cards, card index, etc..
Its strong structure allows a quick, exact and constant working.
The heads holding tools are specifically designed for working in pairs, and therefore it is possible to approach or to move away by a simple movement from a minimum of 45mm to a maximum of 550mm.
The descent of the heads is driven by motor and can be operated by a foot switch pedal or push-buttons.
The machine is also equipped with a button allowing heads to descend slowly, which make the adjustment of tools easier.
Side and back lays make possible any kind of support for the different requirements.
Warranty 1 year.

Full-Auto operated laminator Lami Revo-14T.
Auto feeding, Auto sheet cut, auto counting setting, custom border size.
Overwhelming productivity
High productivity, save time and labor cost, save power comsumption, no rejection due to human error.
Japanese quality assurance.
5 minutes fast warm up time.
Easy " inside cleaning" design.
Can load upto 300pcs papers.
Support max substrate upto 160grams thickness.
Both metal & heater rollers in used to ensure the best laminating quality.
Variety choice of sizes, films and finishing.
Made in Korea quality films.
Support A4 till A3 with Unlimitted length.
Available in 50µ, 80µ, 100µ & 125µ films.
Available in glossy, matt et Soft Touch Matt finishing.
Optional B4 & B5 shaft is available.
Max. laminating width : 305mm
Max. substrate thickness : 160gr./m².
Max. speed : 1.6m/min. (Fixed)
Processing temperature Room : temp.~120°;
Power requirements : 230V.
Power consumption : 1150 Watt.

The USM series models are clearly the flagships of staplers.
They feature the highest variability and an enormous stapling capacity of up to 250 sheets (80g plain paper).
Depending on the model, stapling with up to 6 stapling heads is possible.
The spacing can be freely selected within the range of 40-360mm. STAGO-typical robust design for continuous daily use.
An active clencher matrix and an infinitely variable stapling thickness adjustment guarantee a perfect stapling result.
Due to very short conversion times between different usage scenarios (flat-, saddle stapler, flat-, loop staple, different dimensions, etc.), the USM series is economical on short runs.
Stapling heads : 1-4.
Distance between heads : 40-240mm.
Flat stapling : 2-250 sheets 80gr.
Saddle stapling : yes.
Automation : yes - with module BMK 1800.
Working height : 880mm.

Raineuse et micro-perforeuse automatique GPM 450 AIRSPEED 450.
le rainurage et la perforation (y comprise croisée) sont facilités par un système unique d'alimentation permettant le traitement de tous types de papier entre 80gr./m² et 400gr./m².
L'exactitude de fonctionnement, la fiabilité de la machine, la polyvalence d'utilisation, les nouveaux outils rotatifs de perforation et de découpe en option ainsi qu’une plus grande vitesse sont autant de facteurs complémentaires aux autres options déjà référencées sur le modèle à friction GPM-450 Speed rendant extrêmement avantageux !
Caractéristiques techniques :
Largeur de travail : 115 à 456mm.
Grammage : 80 à 400 gr./m² (rainage, perforation) – 80 à 250 gr./m² (micro-perforation).
Épaisseurs des rainages : CITO 1,0 mm – Papier de 80 à 200gr./m².
Distance minimum et maximum entre chaque rainage : 1/999mm.
Large plateau d’alimentation approprié au format A2
Capacité du plateau d’alimentation : 70mm.
Vitesse : 3.000 feuilles A4/heure (1 pli par feuille).
Nombre maximum de pli par passage : 15.
Grand display 7 pouces pour réglages faciles et précis.
Compteur de lots.
Programme de mémorisation des travaux.
Programmes prédéfinis (1/2, 1/3, 1/4, book cover).
Nombre maximum de roulette de perforation : 13 (1 en équipement standard)
Dimensions (lxpxh sur table) : 1320 x 755 x 1225mm.
Poids : 140kg.
Alimentation électrique : 230 V / 50Hz.
Équipement compris : 2 outils de rainage, 1 outil de perforation, 1 kit de perforation (roulette) et 1 kit de découpe.
Table incluse.
Options :
Outil de perforation Wiro 3:1 trous carrés 4x4mm.
Outil de perforation Wiro 3:1 calendrier trous carrés 4x4mm.
Outil de perforation Wiro 3:1 trous ronds diam 4mm.
Outil de perforation Wiro 3:1 calendrier trous ronds diam 4mm.
Outil de perforation Wiro 2:1 trous carrés 5x5mm.
Kit de perforation 9 TPI (roulette) supplémentaire.
Kit de découpe (roulette) supplémentaire.
Kit de découpe « Kiss cutting » (roulette).
Garantie 1 an.
Conforme aux normes de sécurité CE.

Semi-Auto hydraulic laminator.
Semi-auto feeding with overlap feature.
Pneumatic auto separation.
The anti-curl bar allows thin film laminates to be flat.
Mirror chrome heating roller
Thermal or Cold laminating
Touch screen display system
Digital foiling
2 rolls film installation
Adjustable electric hydraulic pressure system
MAIN FEATURE
Model: SF-540
Max laminate width: 540mm.
Max laminate length : 1200mm.
Laminate paper: 157-350gsm.
Max speed: 15 meters/min.
Control system: Hydraulic.
Max temperature: 140 degree.
Heating mode: Oil heating.
Upper roll: High gloss chromium plating 160mm.
Down roll: Silicon rubber 100mm.
Display: Touch screen.
Motor: AC motor.
Input power: 4000W.
Paper overlap accuracy: 1.5mm
Power: 220V - 240V, 50-60Hz
Core size: 3 inch
Film thickness: 17 - 42 mic
Machine dimensions: 1780x840x1420mm.
Net weight: 240kg.
Warranty 1 year.

Wide-format professional heat-assisted top roller laminator for self-adhesive materials (working width 1600 mm).

Suitable for laminating digital printing media for the visual communication, like floor graphics, window graphics, backlit displays, stickers and pre-spaced stickers, pop-up, graphics for trade fairs, shopping centres, retail outlets, car wrapping and many more.

It allows to mount graphics on boards.

Cost-effective laminator with very good quality, price and performance.

Designed and manufactured completely in Italy.

EASY LAMINATION,
GREAT RESULTS
Working flexibility: it mounts images on panels, applies double-sided adhesive films, application tape and protective film
Cost-effective: very good quality, price and performance
Easy to use control panel to set working parameters
Intuitive pressure control of the roller thanks to the pressure regulator and the gauge
Excellent results without air bubbles and defects
Time saving: easy adjustments of the media thanks to the swing-up steel feed table and the automatic locking system of the shafts. Load and unload of rolls of materials in seconds
New cutting unit with titanium coated blades, durable over time, for greater precision and long-term safety (optional)
Easy to use: compact dimensions, light and easy to move
Long-term reliability and safety
Low maintenance costs
Made in Italy: designed and manufactured completely in Italy
SUITABLE
MATERIALS
Floor graphics / Window graphics / Backlit display
Trade shows graphics
Roll-up banners / Pop-up / Stickers
Rigid boards and flexible media
Table top displays
Car wrapping
Pre-spaced stickers
Many more..

Heat-assisted top roller laminator
Control panel
Control panel for adjusting temperature, speed and many more parameters
Pneumatic lifting and lowering of the upper roller
Gauge to display the pressure of the upper roller
Pressure regulator of the upper roller
Cutting unit
Aluminum shafts
Swing-up steel feed table
Front tray
Feed-in guide (optional)
NEW Lowering of the upper roller with pedal on the back side
It works with air compressor (not included)
Feeding control by hand (control panel) or foot pedal (hand free operation)

Main features :
Processing time (welding cooling) Time Programmable for welding up to a max. 5 min. Programmable time for cooling up to a max. 5 min
Welded steel frame epoxy powder coated. Fixed welding bar integrated in the working table
Equipped with a flat teflon heating band
Control unit impulse for uniform distribution of temperature on the seal bar
Easy-to-use control panel to define up to 20 different welding programs
Welding bar powered by pneumatic pistons
Optionals :
Extensions, add 1 meters both sides
Double laser ray
Kit FAP (fast automatic pocket)
Compressor (24lt. - 8bar)

Datasheet : 1300
Heating lenght about : 1300 mm
Heating width about : 25 mm
Working pressure : 220 kg/cm
Electrode temperature : from 70° to 250° C
Air pressure : 7/8 Bar
Dimensions : L1500xP1300xH1400 mm
Machine weight : 433 kg
Height of work table : 1000 mm
Power supply :400V 50/60Hz
Consumption: 6 kW. plug CEE (red) 16A 3P+T

The Lamidesk SuperSpeed ​​CNC is an easy-to-use application table.
The SuperSpeed ​​CNC is available in several versions: manual or optional motorized version.
Several table sizes are available (cm): 300x160, 300x210, 400x160, 400x210, 500x160, 500x210, 600x160.
Several options available: Led lighting, heating roller, cutting mat.
On the motorized version, the user can mount large prints on their own.
Thanks to its very robust structure and quality components, the Lamidesk can work continuously, absorbing large volumes.
Easy to use, the Lamidesk has no bridge above the roller which makes mounting prints very easy.
The optional roll holder makes it easy to work with a roll of laminate or tape application.
You don't have to mount the roller on the bar but just put it on top!
Optional LED lighting can be integrated into the table. This lighting facilitates positioning.
Thanks to the CNC control, you can determine a position yourself according to your wishes.
CNC control allows you to work faster and more efficiently!
The Lamidesk SuperSpeed ​​CNC has a standard mounting height of up to 100mm. Optionally, you have the option of mounting up to a height of 300mm.
SuperSpeed ​​CNCs are supplied without a compressor, optional on our compressor page. The BB-15V model is perfectly suited.
Robust European manufacture, the warranty is 1 year.
Complies with CE safety standards.

This single head wire stitching machine offers:
The perfect solution for standard and loop stitching of pads and brochures
Robust construction.
Easily adjustable table from saddle for brochures, to flat for pads.
Maximum stitching speed : 203 staples per minute.
Table size : 700 x 240mm.
Thickness : 0-25mm.
Hohner patented cutting system for optimum wire feed, even for thicker products (Computer and Digital printing).
Optional, quickly exchangeable conversion parts for loop stitching.
Warranty 1 year.

Secabo TPD12 pneumatic heat press
The Secabo TPD12 is an outstanding production machine for large-scale productions in the field of sublimation textile finishing and other transfer technologies up to a size of 100cm x 120cm. The pneumatic double plate heat press features a heating capacity of 9.0 kW and designed to provide a maximum pressure of 4 bars, which corresponds to the 140g/cm2 or 1,700kg when using the XXL heat plate. This means, that the TPD12 is perfectly equipped for large runs of high quality large format transfers. The two base plates are superimposed on an electric linear system specially designed to retract one base plate into the heat press, while simultaneously exposing the other base plate. This feature serves to increase efficiency by enabling operators to remove a finished transfer object and/or prepare the next transfer object at the same time, that the other base plate is inside the transfer area within the TPD12's case. The user can choose different modes of operation, namely automatic or manual. In each case, operators are offered protection from injury by a wide range of safety equipment, including emergency shutoff and two-handed operation. The TPD12 facilitates a means for profitable and efficient production of large-scale transfers in large quantities.

Technical Data
dimensions 275cm x 170cm x 150cm
working area 2 x 100cm x 120cm
scope of delivery Transfer press, power cable without plug, connection set for compressor, manual in German language
pressure setting setting of pneumatic pressure
max. downforce 4 bar, 1700 kg, 140 g/cm²
max temperature 225 °C
maximum time preset 999 s
power supply 3P+N+PE, 9.0kW. Connection by an expert is required.
environment 5°C - +35°C/ 30% - 70% humidity
air consumption 200l/min maximum
weight without packaging 110,00 kg
weight with package 931,00 kg
Brand Secabo

Vela is a semi-automatic single-sided laminator with automatic overflow and separator, designed for simple and efficient operation, able to support intensive work cycles. Vela guarantees a wide range of paper sizes and supports materials up to 500 g/m2. With a production capability of up to 7 m/min, it ensures high performance. It can be equipped with the optional high stack suction feeder that allows automatic operations without operator supervision.

With Vela a perfectly laminated sheet is always guaranteed, thanks to the mechanical pressure with electric activation that allows to start laminating by simply pressing the start button. It is equipped with hand sheet feeder with automatic overlapping and automatic bursting system, which allows a smooth lamination process for the operator. All settings can be managed in few seconds directly from the intuitive touchscreen display.

Vela is equipped with an intuitive graphical interface thanks to the 4.3” touchscreen display with the ability to customize all the work-related settings as needed. Among the advantages of the new software it allows to obtain constant production information and to integrate the machine from a “Industry 4.0” point of view. The innovative user interface provides a smooth user experience by guiding the operator to easily set the optimal parameters required for each process.

Technical features :

Lamination Single side
Max paper width 353 mm
Max laminatin film width 340 mm
Paper length 210 - 999 mm
Paper weight 120 - 500 g/m2
Pressure Mechanic
Sheet feeding system Manual
Overlap Automatic
Working speed up to 7 m/min
Sheet separation Automatic (OPP only)
Power supply 230VAC - 50/60hz
Electrical absorption 900 W
Dimensions (WxDxH) 1937x 722 x1318 mm
Weight 150 kg

Electrostatic and mobility :
Thanks to the ESD wheels, peaks in tension are discharged in a controlled manner, without any consequences. Smart mobility increase worker productivity and more efficient space organization

Sheet separation :
Favors the precise laying of laminated sheets, especially when processing double side lamination.

De-curl system :
Significantly improves the flatness of the sheet on single side lamination, ensuring smoother and more professional-looking documents.

Foiling capabilities :
The foil rewinder allows even more flexibility, handling not just lamination but also foil sleeking.

Alo.
don’t call it an
add-on

Call it Alo : an optional high suction paper feeder, which makes the creasing process automatic . Alo is so versatile that it can be used on Flecto but also on the Vela laminator. Equipped with precise air flow adjustments that allow to process even the most difficult cards electrostatically charged. The patented suction system optimizes the grip of the sheets, even with slippery papers, and operates with low noise, since it does not require a vacuum pump. Alo can hold sheets up to 999mm in length and a stack height of 150 mm, increasing the versatility of the machine.

This multi head wire stitching machine for mixed applications is characterised by:
Equipped as standard with Universal 52/8S stitching heads.
It is possible to fit up to four of these heads to the machine.
Standard and loop stitching or mixed applications.
Perfectly suitable as a stand-alone machine, for the completion of a whole system and/or test unit.
Maximum stitching thickness 8mm for standard stitching.
Easily convertible stitching table from pad stitching (flat) to brochures (saddle).
Many varieties of exchange parts sets for a wide range of staple options are available to fit at a later stage.
Simultaneous and central adjustment of stitching thickness and wire length of all heads with only one lever
A backstop and two side lays are fully adjustable for accurate and easy positioning of the staples.
Extremely easy for the operator to change from one format to another.
Perfectly suitable for small production runs, sample stitching or off-line applications.
Maximum stitching per head: 206 staples per minute.
Table size 550 x 280mm.
Warranty 1 year.

Main features :
Adjustments from keyboard and display of the thickness of the support to be laminated, up to 40mm
Simple loading and positioning of the material
Oscillating feeding table for easy loading of the material
Separate regulation with separate display of the temperatures of the two rubberized rollers
Regulation from 0 ° C to 120 ° C for model "H"
Foot pedal control for hands-free work
Comprehensive safety system with emergency stop and optical safety protection with self-verification
Viewing and reporting of any anomalies
Electronic adjustment from the keyboard and visualization on the display of the speed of the rollers
Power supply voltage and frequency 400V / 50Hz. or 220V 50-60Hz
Absorbed power 12A 6200W. For 400V / 50Hz

Efficient automatic creasing – perforating machine with suction feeding and maximum working width 500 mm.
The working speed can reach up to 8.000 sheets/hour.
The sheets are taken from paper reservoir which can be continuously supplied.
The parameters of operations are entered through lucid touch display. Except creasing and perforating bars this machine is also equipped by useful longitudinal perforation.
Suction feeding allowing digital print.
High-quality bar creasing/perforation.
Three sizes of creasing bars.
Rotary perforating system for longitudinal paper processing.
Latitudinal and longitudinal perforation in one step.
Large working desktop – 500mm.
Speed up to 8.000 sheets per hour.
Cross perforationAutomatic searching of middle of the paper.
Wheels for easy manipulation.
Solid and heavy duty waste table
Precise Japanese electronics by Omron, German compressor Becker
Up to 99 pre-set application can be stored in programme memory
Lucid touch display.
Possibility of continuous loading of paper.
5 languages (English, French, Spanish, German and Czech)
MAX. WORKING WIDTH / LENGHT :500 mm / 700mm.
MIN./MAX. WEIGHT OF PAPER :creasing 60 - 400 g/m2,
perforating 80 - 250 g/m2
WIDTH OF CREASE :1,0 / 1,3 / 1,6 mm
MAX. NUMBER OF CREASES : 20
CREASES :2/500 mm

Fully Automatic Laminator with 4 Side Trim Function
With Revo-Flex, you can easily select With/No Margin, also the various functions can
make documents more expressive and suitable for any situation.
Feeding, Laminating, Cutting & Trimming are fully automated.
Press the start button and walk away.
4 Side Trim Function
Long-awaited new feature of Revo Series.
Side slitters are equipped, it can be With-Margin or No-Margin lamination.
LCD touch panel makes any setting intuitive and easy.
Possible to easily clean the inside by using the "Cover-Open Function".
Max. laminating width 320mm
Max.Substrate thickness 38/80/100/150μ(exclusive film)*¹
Max. speed 700～2,000mm/min (variable type)
Laminating temperature OFF、80～140℃
Power requirement / consumption 【UL】AC100V 50/60Hz 1000W
External dimensions[W×D×H](mm) 1,300 × 610 × 1,080
(With stand, feeder tray, extension tray, stacker)
Weight 70kg
Feeder tray capacity 200 Sheets (copy paper)
Available paper thickness 64 - 240g/m2
Warm-up time 5minutes(approx.)*²
Size of paper used A3/A4/A5/B4/B5/Letter/Digital
Finished size*³ With-Margin
　A3：303×426mm
　A4：303×216mm
　B4：263×370mm
　B5：263×188mm
　A5：216×154mm
No-Margin
　A3：294×417mm
　A4：294×207mm
　B4：254×361mm
　B5：254×179mm
　A5：207×145mm
*1 Only authorized Revo Film can be used.
*2 When set to 100℃(212℉) . Depends on the environment.
*3 Error range: ±0.5mm (W,H)

Main features :
Touch screen controll
Automatic speed regulation
Pneumatic laminator with internal silent compressor
Silicone roll
Adjustable Pneumatic pressure regulation
Easy pneumatic roll movement (up and down)
Hands Safety sensor
Plug and play
Self-adaptive, the air pressure system with independent pistons adapts automatically to different thicknesses
Tournable working table
Adjustable stainless steel rolls friction
Pedal for safety precedure start
Stop roll drop (for laminate rigid media up to 50mm)
Safety tower light

Optionals :
Re-winder
Vertical pneumatic and motorized cut
Unwinder Roll holder with clutch

Available models :
Neolam Plus heated roll 50c
Neolam Plus S Top Hot roll 120c
Neolam Plus M Superior hot roll and lower hot roll 120c for encapsulation

The USM series models are clearly the flagships of staplers.
They feature the highest variability and an enormous stapling capacity of up to 250 sheets (80g plain paper).
Depending on the model, stapling with up to 6 stapling heads is possible.
The spacing can be freely selected within the range of 40-360mm. STAGO-typical robust design for continuous daily use.
An active clencher matrix and an infinitely variable stapling thickness adjustment guarantee a perfect stapling result.
Due to very short conversion times between different usage scenarios (flat-, saddle stapler, flat-, loop staple, different dimensions, etc.), the USM series is economical on short runs.

ColorFlare CF1200 model range

The CF1200 model range includes: CF1200L and CF1200LX. Both models, it deliver superb foiling, lamination and holographics. Featuring the easy-to-use touch control panel, and the innovative ‘burst separation’ system ensuring clean perpendicular trims between sheets. Current models now also ship with the up-rated air compressor and new ‘pull roll control’ function for improved foiling results.

CF1200L features the new ‘extended inclined delivery table’, perfect for enhancing semi automatic feeding and also long media. Furthermore, this model comes with the ‘premium finish flaring assembly’, which helps achieve a superior mirror finish when foiling large areas – as well as all the standard features of the CF1200 base model.

CF1200LX is the flagship model and features all of the above, plus it also comes with the advanced ‘2nd flaring roller assembly’, which allows a laminate and a foil roll to be resident on the machine at the same time – reducing set up times and enabling a much faster switch between media.
NEW Even more pneumatic pressure

NEW Ships with premium finish flaring assembly*
NEW Level, +5° or +10° inclined delivery table
NEW Lamination pull roll control
Advanced dual process for lamination and foil flaring technologies for digital applications
Multiple jobs and flaring effects possible with just 1 machine
up to 10 metres per minute
2,500 SRA4 sheets per hour
Burst separation wheel
100 – 400gsm / micron
No need to have traditional UV coating for diverse effects

CF1200LX TECHNICAL SPECIFICATION

Laminating speed: 1.5m/min ~ 10m/min
Base substrate thickness: 100 ~ 400gm2
Front roller diameter:
Top: high glossy chrome 100mm
Bottom: silicon 80mm
Rear roller diameter: Silicon 55mm
Power requirement: AC 220~240V, 50/60Hz, 12A
Power consumption: 2.8kw
Warm-up time: 5 minutes
Heating system: Infrared heater
Laminating temperature: Maximum 150°C
Temperature control: Capacitive touch screen
Speed control: Capacitive touch screen
Display system: LCD Panel
Roller pressure: Pneumatic cylinder
Film core size: 77mm (3″) / Dual – 58mm, 50mm
Air compressor: 100 psi maximum pressure,
3.2 CFM open flow (50 Hz)
Temperature sensing method: Thermo-couple inserted in the
roller shell
Net weight: 187kg

Includes:

the extended, inclined delivery table
premium finish flaring assembly for smoother foil output
premium finish flaring assembly for smoother foil output

Machine de robuste structure, fabriquée en fonte et entièrement traitée avec peinture antiacide et antiéraflure.
Format maximum de travail 500mm.
ENDEVOR est une machine née pour garantir une parfaite exécution du travail avec une rapidité extrême, même en cas de très petites quantités d’imprimés, en assurant le moindre déchet.
En particulier, elle est indispensable pour le rainurage sur papiers imprimés par machines digitales.
Le modèle semi-automatique est une machine très facile à employer: l’introduction de la feuille est manuelle, tandis que l’avance est automatique.
Par un ordinateur à microprocesseur, on peut programmer 100 canaux différents, dont chacun peut contenir jusqu’à 100 positions de rainurage (stations).
La machine est fournie complète d’un outil de rainurage pour travailler papiers de 380 g max.
Sur demande, on peut fournir des outils de rainurage spéciaux ou des outils de perforation pour obtenir d’autres profils.
A tout moment le modèle semi-automatique ENDEVOR peut être connecté à notre margeur automatique basse pile mod. PREDATOR, ainsi qu'à notre margeur automatique haute pile mod. ATLANTIS.
Tous les deux sont équipés d’une prise spéciale pour être connectés à d’autres unités pour l’exécution de travaux simultanés (rainurage, perforation, pliage).

The Morgana DocuFold Pro is a brand new concept fully automatic paper folding machine.
Equipped with the latest SmartScreen technology, it enables an operator with minimum training to carry out a variety of folds from an icon driven touch screen. An unlimited alpha numeric memory is available to store all standard and non standard jobs.
Powerful suction feeder.
7" SmartScreen.
Side lay alignment of the sheets, prior to folding.
Low pressure suction chamber to control curled paper before it enters the fold rollers.
Fully enclosed fold plates. Fitted with anti-static brushes.
Plug in perforating and scoring attachment.
Variable speed up to 27,500sph.
Catch tray to collect work for perforating or scoring.
Driven delivery belt stacker.
Counting & batching.
Double sheet, and jam detector.
Warranty 1 year.